5/16 X 1-1/4 X 5/16 X 3 Two Flute Downcut Spiral

Description

This is our standard 6″ diameter, 60mm wide, three
_x000D_
_x000D_
_x000D_
_x000D_
_x000D_
_x000D_knife dedicated head, with your choice of bore
_x000D_
_x000D_
_x000D_
_x000D_
_x000D_
_x000D_depending on the machine. Our industry standard
_x000D_
_x000D_
_x000D_
_x000D_
_x000D_
_x000D_profiled insert is ground with both profiles, a total
_x000D_
_x000D_
_x000D_
_x000D_
_x000D_
_x000D_of four cutting on the same insert. See picture. In
_x000D_
_x000D_
_x000D_
_x000D_
_x000D_
_x000D_moulder applications all four patterns can be used
_x000D_
_x000D_
_x000D_
_x000D_
_x000D_
_x000D_without adjusting spindle heights. Our unique flip
_x000D_
_x000D_
_x000D_
_x000D_
_x000D_
_x000D_flop design allows runs up to 100,000 ft. of flooring
_x000D_
_x000D_
_x000D_
_x000D_
_x000D_
_x000D_with one set of inserts with one insert rotation and
_x000D_
_x000D_
_x000D_
_x000D_
_x000D_
_x000D_one flip of the side heads. Made from impact resistant
_x000D_
_x000D_
_x000D_
_x000D_
_x000D_
_x000D_carbide. These heads can be designed to match
_x000D_
_x000D_
_x000D_
_x000D_
_x000D_
_x000D_existing profiles. Machine adjustment is not needed
_x000D_
_x000D_
_x000D_
_x000D_
_x000D_
_x000D_after initial set up, insert change or rotation.